Technical Documentation

• Normizacija i norme, formati papira, tehničko pismo, mjerilo, sastavnice
• Predočavanje oblika s osnovama nacrtne geometrije, prostorne projekcije, ortogonalne projekcije
• Presjeci
• Pojednostavljeno crtanje (navoji, zupčanici, lančanici, …)
• Tehnički simboli – elektrotehnika (IEC oznake), pneumatski, hidraulički, itd. Tehničko prostoručno skiciranje
• Kotiranje 1. kolokvij
• Tolerancije dužina i dosjedi
• Tolerancije kvalitete površine (tekstura površine – hrapavost)
• Tolerancije oblika
• Tolerancije položaja
• Vrsta dokumentacije prema namjeni
• Intelektualno vlasništvo 2. kolokvij

1. ability to create a technical drawing respecting standards, such as the choice of features, technical script, paper size, scale
2. ability to design a mechanical element together with a necessary number of projections using the knowledge related to descriptive geometry
3. ability to design the necessary cross-sections of mechanical elements
4. ability to standardise the tolerance and conjunction related to specific mechanical elements
5. ability to sketch a mechanical element in both orthogonal and isometric projection
6. ability to design the necessary positions and an assembly drawing in both orthogonal and isometric projection
7. ability to design a mechanical element and an assembly AD drawing using AutoCAD
8. planning and preparing for the forthcoming workshops
9. differentiating the coordinative systems and the methods of their application in AutoCAD
10. create the prototype drawing in AutoCAD
11. make a drawing with all kinds of coordinates
12. combine the basic commands for drawing and modifying of the drawing Draw, Modify
13. edit the methods of listing for different scales on the same document
14. draw the machine part in section with the entry of symbols for surface roughness and the chart of the tolerance
15. edit the section by hatching and marking the section
16. draw the gear wheel in section with conical hub, and properly mark conus
17. edit of dimension and tolerance
18. connect the spatial isometric 3D projection with orthogonal 2D projection
19. connect orthogonal 2D and spatial isometric 3D projection
20. draw the shaft
21. drawing of the consecutive sections and details of the shafts
22. draw all the elements of the workshop drawings
23. draw the assembly drawing of the hook with the pulley
24. draw the position of the pulley and the hook

Required reading

• Z. Herold: Inženjerska grafika, Inženjerski priručnik, Školska knjiga, Zagreb, 1994.
  Z. Herold, D. Žeželj: Inženjerska grafika – Metodička vježbenica, FSB, Zagreb, 2006.
  D. Rohde, N. Bojčetić, D. Deković, Z. Herold, D. Marjanović, D. Žeželj: Računalna i inženjerska grafika, Podloge za vježbe iz Auto CAD, FSB, Zagreb, 2005.
  M. Opalić, M. Kljajin, S. Sebastijanović: Tehničko crtanje, Zrinski d.d., Čakovec, 2003.

Further reading

• Koludrović: Tehničko crtanje u slici s kompjuterskim aplikacijama, Autorska naknada Koludrović Ć. I. R., Rijeka, 1997.