izvorni znanstveni rad
The paper compares the abrasion and erosion wear resistance obtained on test samples made from the high-speed steel Böhler S390 Microclean. The specimens were hardened and tempered, with or without application of DCT, and after that they had been coated by the thin PVD TiAlN layer. Tests of abrasive wear resistance were performed using an abrasive wear testing machine constructed according to the norm ASTM G 65-85. The weight loss was measured after 26 m, 52 m and 78 m during the abrasive wear testing. Test of erosion resistance was carried out by exposing test samples to abrasion or impact erosion of fine sand particles and determining the weight loss after 30 and 60 minutes of wear. Worn surface were analyzed by scanning electron microscopy. The significant influence of austenitization temperature on abrasion wear resistance has been observed, while the DCT has a minor effect. The DCT has significant influence on impact erosion resistance, while the austenitization temperature has a secondary influence.
high speed steel S390 MC, TiAlN coating, abrasion wear, erosion wear
Razvojem virtualizacijskih tehnologija raste kompleksnost IT sustava, dok korisnici istovremeno zahtijevaju brži pristup resursima, napredne integracije i jednostavnost korištenja. Jedno od ključnih rješenja za ove izazove primjena je…
Ovaj rad istražuje i uspoređuje mogućnosti prosljeđivanja grafičkih kartica na Hyper-V i KVM hipervizorima prema virtualnim strojevima, detaljno opisujući metode, postupke i razlike u arhitekturi koje utječu na…
The ever-growing usage and adaptation of HTTP/3 in web traffic leverages Quick UDP Internet Connections (QUIC) as a transport protocol. QUIC is widely recognized for reduced latency, enhanced…