izvorni znanstveni rad
Research of truss girder joint based on the steel pipe placed in bottom and top cord and steel rods glued-in web member, requires local reinforcing of laminated timber in the zone of steel pipe. In this paper the reinforcing of wooden laminated element at the connection areas will be point out. Tests on 120mm width, 200mm high and 1000mm long specimens loaded perpendicular to the grain through a steel tube 50mm in diameter will be carried out. Numerical models with material and geometric nonlinearities were made with Abaqus /CAE for both series, reinforced and no reinforced timber.
truss girder ; glued-in steel bars ; fiberglass
Razvojem virtualizacijskih tehnologija raste kompleksnost IT sustava, dok korisnici istovremeno zahtijevaju brži pristup resursima, napredne integracije i jednostavnost korištenja. Jedno od ključnih rješenja za ove izazove primjena je…
Ovaj rad istražuje i uspoređuje mogućnosti prosljeđivanja grafičkih kartica na Hyper-V i KVM hipervizorima prema virtualnim strojevima, detaljno opisujući metode, postupke i razlike u arhitekturi koje utječu na…
The ever-growing usage and adaptation of HTTP/3 in web traffic leverages Quick UDP Internet Connections (QUIC) as a transport protocol. QUIC is widely recognized for reduced latency, enhanced…
