izvorni znanstveni rad
In this study, the application of powder-pack boriding on the properties of austenitic stainless steel AISI 316L (X2CrNiMo17-12-2) was investigated. Boriding was carried out in a resistance furnace “Pika” with automatic temperature regulation using the boriding powder DURBORID G. The boriding process was conducted at a temperature of 900 °C for durations of 2, 3, 4, and 5 hours. The microhardness of the boride layer was examined using the Vickers method, while microstructural analysis was performed with an optical microscope. The corrosion resistance of borided AISI 316L stainless steel was tested in a 3.5% NaCl solution in distilled water, using a DC potentiostatic polarization method.
boriding; AISI 316L; corrosion resistance; microhardness
Razvojem virtualizacijskih tehnologija raste kompleksnost IT sustava, dok korisnici istovremeno zahtijevaju brži pristup resursima, napredne integracije i jednostavnost korištenja. Jedno od ključnih rješenja za ove izazove primjena je…
Ovaj rad istražuje i uspoređuje mogućnosti prosljeđivanja grafičkih kartica na Hyper-V i KVM hipervizorima prema virtualnim strojevima, detaljno opisujući metode, postupke i razlike u arhitekturi koje utječu na…
The ever-growing usage and adaptation of HTTP/3 in web traffic leverages Quick UDP Internet Connections (QUIC) as a transport protocol. QUIC is widely recognized for reduced latency, enhanced…