Tehničko veleučilište u Zagrebu · Zagreb

Compressive Strength of Glass-Hybrid Material Modified with Tio 2 and HAp

sažetak izlaganja sa skupa

sažetak izlaganja sa skupa

Compressive Strength of Glass-Hybrid Material Modified with Tio 2 and HAp

Vrsta prilog sa skupa (u časopisu)
Tip sažetak izlaganja sa skupa
Godina 2021
Časopis Journal of dental research
Nadređena publikacija 2021 IADR/AADR/CADR General Session (Virtual Experience). U: Journal of Dental Research 2021
Stranice str. 1-1
ISSN 0022-0345
EISSN 1544-0591
Status objavljeno

Sažetak

Objectives: The objective of this research was to investigate compressive strength, breaking strength and compressive modulus of glass hybrid restorative material modified with TiO 2 nano particles (NP), hydroxyapatite (HAp) particles (<45µm) and a combination of TiO 2 NP and HAp particles. Methods: Materials used in the study were glass hybrid material Equia Forte HT Fil (GC Corporation, Tokyo, Japan), TiO 2 powder P25 (Degussa, Essen, Germany) and HAp synthesized from cuttlefish bone and grounded in a mortar to obtain HAp powder. There were four groups of samples (N=10): (i) Equia Forte HT control group ; (ii) modified with 3 wt% TiO 2 ; (iii) modified with 3 wt% HAp and (iv) modified with 1.5wt%TiO2 + 1.5wt%Hap (Figure 1). Measurements were performed in the universal testing machine and compressive strength (CS), breaking strength (BS) and compressive modulus (CM) were calculated for the four groups of samples (Figures 2 and 3). Statistical analysis was performed using ANOVA and Tukey test and the equality of variances was tested using Leven test.Results: CS, BS and CM differed significantly between the groups (ANOVA test, p = 0.008, p = 0.004 and p = 0.0001, respectively), (Table 1). CS and BS were significantly higher in 3wt% HAp group than in other two experimental groups (3wt%TiO 2 and 1.5wt%TiO 2 + 1.5wt%HAp groups), (Table 1). CM was significantly higher in 3wt% HAp group compared to the control group and 1.5wt%TiO 2 + 1.5wt%HAp group (Table 1).Conclusions: Equia Forte HT Fil with 3wt% HAp micro particles added to the original powder showed improved CS and BS, and CM was significantly higher compared to the control group.

Ključne riječi

HAp ; TiO2 ; compressive strength ; glass hybrid