Preskoči na sadržaj
Moj profil

izvorni znanstveni rad · 2025

Energy Analysis of a Numerical Model of the ECAP Process for an Aluminium Workpiece

doc. dr. sc. Petar Piljek

Sažetak

The study presents a numerical simulation of the Equal Channel Angular Pressing (ECAP) process, which aims to refine the microstructure and enhance the mechanical properties of aluminum. Numerical simulation of the ECAP process was conducted using Abaqus, with an emphasis on the energy analysis of the model. The channel was dimensioned and modeled as a shell geometry with a square cross-section, while the punch was defined as a rigid body. The aluminum workpiece was modeled as a deformable body, and computational efficiency was improved by utilizing symmetry. Contact conditions included a friction factor applied between the workpiece and the channel walls. To ensure physical consistency, the simulation was monitored through the evolution of kinetic, internal, and frictional energies. In addition, the reaction force on the punch was extracted and qualitatively compared with reference results available in the literature. Results reveal the formation of shear zones in the channel corner and highlight the significant effect of friction on deformation behavior and punch force. The proposed energy-based validation confirms the reliability of the numerical model and provides a foundation for further parametric studies and experimental comparison.

Ključne riječi

Equal Channel Angular Pressing (ECAP) Finite Element Method (FEM) energy analysis aluminum workpiece punching force