Development of a High-Speed Electric Rotating Machine

<jats:p>High-speed electric machines enhance power density and eliminate the need for a gearbox in waste heat recovery microturbine systems. However, existing designs often suffer from high manufacturing costs and complex cooling requirements. This study presents the development, experimental validation, and comparative analysis of three high-speed machine designs. First, a lower-speed induction machine prototype, constructed using standardized components, was tested at an operating speed of 13,000 rpm. This prototype enabled experimental validation of the numerical model used for loss calculations. Experimental results showed total losses of 7.89 kW, closely matching the simulated value of 7.75 kW at an output power of 93.1 kW, i.e., an efficiency of 92.19%. Building on these findings, two smaller machine prototypes were developed: one featuring an induction squirrel-cage rotor and the other employing a surface-mounted permanent magnet rotor topology. Both machines were designed and evaluated using finite element analysis and conjugate heat transfer simulations. Their performance was analyzed under both sinusoidal and pulse-width-modulated voltage supply conditions. At an operating speed of 14,000 rpm, the permanent magnet machine outperformed the induction machine, achieving 63.2 kW of mechanical power and an efficiency of 96.21%, while operating at lower temperatures. In comparison, the induction machine delivered 52.4 kW of mechanical power with an efficiency of 94.64%. The primary novelty and contribution of this work lie in the implementation of a two-pole machine architecture capable of achieving an output power of 100 kW at operating speeds between 20,000 and 25,000 rpm. Compared with similar solutions reported in the literature, the proposed machines feature a simplified bearing arrangement and a more straightforward liquid-cooling system. These characteristics have the potential to reduce manufacturing costs and simplify maintenance during operation.</jats:p>