sažetak izlaganja sa skupa
Boronizing is a type of thermal diffusion process with primary goal of increasing the surface hardness, wear, and corrosion resistance. Wear resistance of boronized parts depends on the type of borides that form on steel surface and their thickness. This paper focuses on evaluation of borides layers that form on martensitic stainless steel X90CrMoV-18. Pack boronizing was carried out at temperature range of 850-1000°C in duration of 1, 3 and 5 hours. After boronizing differences in surface boride layers were observed for different temperatures and time of boriding. Boriding compound depth and cross section hardness was measured. Results indicate difference in boride layer thickness and volume share of boride phases depending on temperature and time of boriding.
X90CrMoV-18, arrhenius equation
Razvojem virtualizacijskih tehnologija raste kompleksnost IT sustava, dok korisnici istovremeno zahtijevaju brži pristup resursima, napredne integracije i jednostavnost korištenja. Jedno od ključnih rješenja za ove izazove primjena je…
Ovaj rad istražuje i uspoređuje mogućnosti prosljeđivanja grafičkih kartica na Hyper-V i KVM hipervizorima prema virtualnim strojevima, detaljno opisujući metode, postupke i razlike u arhitekturi koje utječu na…
The ever-growing usage and adaptation of HTTP/3 in web traffic leverages Quick UDP Internet Connections (QUIC) as a transport protocol. QUIC is widely recognized for reduced latency, enhanced…